TL250 - Internet Alarm Communicator
T-Link TL250 Internet alarm communicators create fully supervised security solutions between protected premises and our central monitoring station. The simple-to install modules can save your money by taking advantage of your existing Internet connection. This method provides flexibility and an always-on, two-way line of communication. The TL250 communication stream is small and requires only a limited amount of network bandwidth. This ensures that the integrity of the data being transferred never becomes compromised.
To ensure reliable and lightning fast event notification, the TL250 is capable of reporting to two different receiver IP addresses and a back-up feature that allows the panel to communicate even if the first IP Address is inaccessible. The TL250 is also able to be programmed to communicate events to two different e-mail addresses. These e-mail addresses can be associated with a personal computer, pager, enabled mobile phone or even a PDA.
The TL250 is compatible with the following control panels via the built-in PC-Link:
• PC1864 PowerSeries 8-64 zone control panel
• PC1832 PowerSeries 8-32 zone control panel
• PC1616 PowerSeries 6-16 zone control panel
• Power864 PC5020 (version 3.2 or higher)
• MAXSYS PC4020 (version 3.31 or higher)
Supports Power 864, New Power Series and MAXSYS control panels
Programmable through the system keypad, PK5500 LCD keypad or T-Link Console software
Reports events to 2 different receiver IP addresses
Instant, always-on IP communication
128-bit AESencryption (NIST approved)
Supports DHCP (dynamic IP addresses)
UL, CSFM and ULC Level 3/4/5 Listed
Low network bandwidth requirements
Compatible with 10/100BaseT networks
Works over local LAN/WAN network or the Internet
4 on-board programmable inputs and 2 programmable voltage outputs as stand-alone module
Polling and hardware substitution protection
Software upgrades via network
Download control panel via Internet with DLS software
